* There is a $1 surcharge on shipping per item for this product due to its weight and the cost to ship *
Gilders Paste is a wax based to highlight Metal, Wood, Ceramics, PolymerClay, Bisque, Candles, Gourds, and more!
Apply with finger, brush, cloth, sponge. Blend colors for an endless color palette.
Mix in thinner to rejuvinate, soften, blend.
Dries in 10 minutess to touch, 12 hours fully dry. no tacky residue.
Burnish with soft cloth to a high luster. Does not fade.
One tin can contains 1.5 oz, 30 ml covers 30 sq/fl, 2.78sq/m
This wax-based medium can be used to add non-fading color or a gilded finish to materials such as Metal Castings, Filigree, Brass Stampings, Ceramics, Wood, Etched Glass, Polymer Clay, Resin and more! It can be applied as-is to clean, dry, oil-free surfaces with a cloth, cotton swab, sponge, your finger... or thin it with paint thinner to create a paste, paint, stain or wash. Smooth surfaces should be slightly roughened with fine grit sandpaper or steel wool before application. Gilders Paste dries to the touch in 10-15 minutes and completely dries in 12 hours with no tacky residue. One tin of Gilders Paste covers over 30 square feet of surface area. Choose from 9 UV resistant colors which can be layered to create stunning and unique finishes and textures.
If the product is hard, it can be rejuvenate with few drops of either; paint thinner, mineral spirits, turpentine or Turpenoid (turpentine substitute) knife in and mix. The ability to rejuvenate this product allows a long shelve life. There is no need to mix up the whole tin, just mix what you need as you need it. Gilders Paste goes a long way. Important: Do not use any oil base cleaners/solvents such as Turpenoid Natural. The oil content of these type of cleaners/solvents will not allow the Gilders Paste to dry and will remain wet or tacky for days to weeks. If you have accidentally used this type cleaner/solvent leave the tin open until completely dried out and then follow the suggestion for rejuvenation above.